These clothing/fabrics do not last longer then regular street clothing.
See fabric details on the side of each product for some fabrics are more durable.
To Repair or To Retire?
When is it appropriate to repair & when is it time to retire your FR garment?
Eventually, every flame resistant garment reaches the age and condition that warrants its removal from service. Until that time, it is possible to make small repairs in order to extend the life of the garment. Any hole or tear in the flame resistant fabric leaves wearers vulnerable to burn injury should they be subjected to a thermal event. Proper repair of an FR garment necessitates following certain guidelines so that the protective performance of the garment is not diminished as a result of the repair.
It is essential that the fabrics and thread used for repairs are equivalent in performance to those used in the original construction of the garment. All Bulwark garments are sewn with aramid thread and the same should be used in any repairs attempted on the garment. Some users have established a practice of saving panels of fabric from retired garments as a source of cloth for mending garments still in service. Zippers, buttons, fasteners and other closure systems must meet basic heat resistance requirements; check with the garment manufacturer for a source of suitable trim and findings.
Although there are no strict guidelines given by any source, there are limitations on the extent of any repair. Rips, tears or holes that exceed 1â€ in length or diameter are likely too large to be safely repaired in the field. As a practical measurement, damaged areas suitable for repair should not exceed the size of a quarter. In cases where the affected area is larger, it is prudent to retire the garment. Fabric that has become thin or threadbare in spots due to heavy wear may provide reduced protection from heat; garments showing signs of heavy wear like this are probably nearing the end of their useful wear life and should be removed from service at the discretion of the wearer or in accordance with the safety policies of the employer.
ASTM International has developed two standards which describe the best practices for home and industrial laundering of FR garments. Both documents briefly address the repair and retirement of flame resistant clothing. For more details, consult ASTM F1449, Standard Guide for Industrial Laundering of Flame, Thermal and Arc Resistant Clothing, and ASTM F2757, Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing.
FLAME RESISTANT FABRICS
Your review of fabrics and use should consider all factors. There is no perfect flame resistant garment that meets all needs for end use requirements. Hudson Workwear is not liable for improper use. If you need further information to make your decision, we can supply manufacturer specifications, other reference materials or contacts upon request.
All garments have manufacturer's tags indicating fabric information and standards they meet.
Comfort Blend® is a Nomex® IIIA/FR Rayon Blend that is widely used in protecting against flash fires and electric arcs in such industries as petrochemical and utilities. The unique fabric blend is also typically 85% of the cost of the standard NOMEX® IIIA fabrics, making it a popular choice for companies looking for cost effective FR clothing solutions.
Cool Touch is a South Mills trademark for a 65% Nomex, 35% FR viscose Rayon blend. Cool Touch was developed as an effort to address the "too hot" and "not comfortable" aspects of Nomex IIIa. Cool Touch blends are available in 4.5 oz. woven only.
Cool Touch® 2 is a 7 oz. HRC 2 inherently flame-resistant fabric that provides comfortable, durable and affordable protection
to professionals working in hazardous conditions found in a variety of demanding industries and work environments.
Reliant is an inherently flame resistant blend of 55% modacrylic, and 45% long staple cotton. It is designed to smother flames when exposed to fire. The protective qualities of the modacrylic fiber are â€œlocked in within the fiberâ€ and cannot be washed or worn out, regardless of the number of wearing's or washings the garment may receive. This knit fabric combines uncompromised protection with the comfort, softness and breathability that one would associate with high quality combed cotton.
FireWear® is a Springfield LLC. trademark for a FR 55% (Fibrous Flame Retardant Fiber) and 45% combed cotton blend. It is inherently flame resistant.
It is available in knit and woven fabrics in a variety of colors and weights.
Excel-FR is a Bulwark trademark for FR100% cotton fabrics.
Excel-FR Comfortouch is a Bulwark trademark for 88% cotton, 12% high tenacity nylon fabrics.
Indura is a Westex, Inc. trademark for FR 100% cotton fabrics made flame resistant through an ammonia cure process. The process has only a minor effect on the positive characteristics of cotton (soft hand, wear, breathability and shrinkage). The ammonia cure process is guaranteed by Westex to ensure compliance with ASTM F1506. Indura is available in woven fabrics in a variety of colors.
Indura UltraSoft is a Westex, Inc. trademark for an 88% Cotton/12% High Tenacity Nylon blend made flame-resistant through an ammonia cure process. The ammonia cure process is guaranteed by Westex to ensure compliance with ASTM F1506. UltraSoft is available in woven fabrics in a variety of colors.
Lenzing FR® is a specialty viscose fiber. The fiber, which is made of a natural raw material, has a flame retardant substance incorporated throughout the cross section of the fiber. As well as being eco-friendly, the latter also ensures permanent protection. Lenzing FR® keeps the body dry and cool and offers protection from all kinds of heat: fire, radiant heat, electric arcs, molten metals and flash fires.
Modacrylic is a synthetic copolymer fabric similar to acrylic but it is flame retardent. The fibers are difficult to ignite and will self-extinguish. In addition to a modacrylic's flame retardant properties it has a relatively high durability that is comparable to wool. Modacrylic is soft, warm, resilient and will not wrinkle.
Nomex® is a Dupont trademarked flame-resistant meta-aramid fiber that is similar to nylon but is more ridged and durable. It has excellent thermal, chemical and radiation resistance.
Nomex IIIa is 93% Nomex, 5% Kevlar and 2% static dissipative fiber fabric. It is inherently flame resistant. Nomex IIIa was the FR Industry Standard, but is being replaced by fabrics and blends that offer similar protection and superior comfort characteristics.
Polartec® Power Dry® FR performance features combine both permanent moisture management with permanent flame resistance. Featuring Polartec® patented bi-component knit construction that uses different yarns on either side of the fabric. This creates two different
surfaces: one that is optimized to move moisture away from the skin, the other to dry quickly.
Polartec® Power Stretch® FR offers superior flame resistance without sacrificing standard Power Stretch® performance features of moisture wicking, 4-way stretch and comfort. These lightweight fabrics do not restrict the movement of body moisture vapor, providing all day comfort and breathability.
Polartec® Thermal FR® combines the performance properties of Polartec® Classic 200 fabric with permanent flame resistance properties.
Like other Polartec® fabrics, the velour construction of Polartec® Thermal FR® creates air pockets that trap air and retain body heat.
The fabric offers superior warmth without weight, great breathability and dry time performance, is durable and comfortable.
Protera® is one of the lightest weight NFPA 70E Category 2 technologies on the market today, and can stand up to more washes than FR cotton nylon blends of similar weight. Made by DuPont is is a blend of 33% Nomex® and Kevlar®, 65% Modacrylic and 2% Antistatic.
Spentex® FR is inherently flame resistant with FR protection built right into the fiber through the combination of carbon with proprietary strengthening fibers. The result is a cost effective garment alternative that provides better protection and greater comfort than any other FR textile on the market. It is more durable than any other FR garment. Spentex uses the same technology used in today's sporting fabrics making it breathable and cool.
Tecasafe® Plus is engineered to provide unbeatable electric arc and flash fire protection that lasts twice as long as FR treated cotton fabrics. Tecasafe® Plus is made of cellulosic fibers that make the fabric cool, breathable and extremely comfortable. It has superior abrasion resistance and is highly colorfast, retaining its strength, shape and color even after multiple industrial launderings. The Tecasafe® Plus long life cycle, combined with its competitive cost, creates exceptional value in flame resistant garment.
TECGEN SELECT® brand flame and flash fire resistant clothing combines light weight, fast moisture wicking technology and exceptional breathability. TECGEN® fiber is a patented, Bi-regional fiber with unique heat protection capabilities. It features a high density carbonaceous shell, which provides protection from radiant heat, and an acrylic core that allows the fiber to maintain good textile properties. The beauty of TECGEN® fiber is that the fiber can be blended or spun into normal textiles, unlike carbon fibers.
Hudson Workwear will except any return within 60 days of delivery as long as the garments have not been washed, worn, or had the tags removed. We do not resell garments to customers that are not in original condition.
Garments with embroidery are not eligible for return.
If you believe that a garment is defective after washing or wearing, Hudson Workwear will provide a return label for the garment(s) and return them to the manufacturer for review. If the determination is made that the garment is defective, Hudson Workwear will reissue a new or repaired item.
Any exchange garments that are shipped will be sent at no additional shipping charge.
Please enclose the form below or make sure the following information is enclosed in the package as we do not require any Return Authorizations.
Information needed: name on order, Items returning/exchange, how you would like to proceed: credit or exchange, and all contact information.
Printable Return Form